EWAQ-G

EWAQ-G

Air Cooled Chiller with scroll compressor using R-410A refrigerant - DISCONTINUED

DISCONTINUED

 

SPECS OVERVIEW

  • Cooling capacity range between 69 – 154 kW 
  • SEER and EER up to 3.12 and 4.36 respectively
  • efficiency versions: Standard and Reduced 
  • sound configurations: Standard, Low and Reduced 
  • R-410A Refrigerant  
  • Hermetic orbiting Scroll compressor with Integrated inverter 

BENEFITS 

  • PartialTotal heat recovery using Plate to plate heat exchangers for hot water production
  • Capability of  -10°C leaving liquid temperature with Brine version (antifreeze required) 
  • Significant saving on annual energy cost with High efficiency at full load and Maximum efficiency at part load conditions, which is majority of operation time of chiller is used
  • Master/ Slave (M/S) control with functionality that allows to manage up to 4 chillers installed in parallel on the same water loop 
  • Hydronic kits with Single or double centrifugal pumps for Low and High lift inertial tank volume up to 190 litres

FEATURES 

  • The MicroTech III controller with Superior control logic and compatibility with ModbusRTU , LonWorksBacNet BTPEthernet TCP/IP, and Daikin cloud monitoring platform Daikin on Site 
  • Direct expansion plate to plate Evaporator made of Stainless steel  
  • The evaporator exchanger equipped with an electric heater for protection against freezing  
  • Specific Aluminium alloy Microchannel Condenser coils for higher corrosion resistance 
  • High-efficiency condenser fans with blades made of glass reinforced resin to maximize performances  
  • System security including; Under/over voltage protection and freeze protection
  • Evaporator Victaulic kit featuring hydraulic joint with gasket for an easy and quick water connection 
Daikin Eurovent certificated

Certified in accordance with the Eurovent Certification Program: Liquid Chilling Packages and Heat Pumps (LCP-HP).
Certified units may be found in the Eurovent website at www.eurovent-certification.com

Get Quotation

Get in touch with details about the requirements of you project, indicating operating conditions, plus options, controls you are interested in, and any other relevant information. This will allow us to get back to you in no time with the best offer for your needs.

Step 1 of 4

  • Your cooling target

  • Operating conditions